Technical summary
Based on the ESP32-S3, supports Wi-Fi/Bluetooth, and features built-in RS485 and CAN interfaces.
Built-in protection circuits such as power isolation and optocoupler isolation,
Safe, Stable and Reliable

- Based on an ESP32-S3 microcontroller with a 32-bit dual-core Xtensa LX7 processor, capable of running at 240MHz.
- Built-in 2.4GHz Wi-Fi and Bluetooth 5 (LE) dual-mode wireless communication, with superior RF performance
- Built-in isolated RS485 interface, for connecting to various Modbus RS485 industrial modules or sensors
- Built-in isolated CAN interface for easy access to various CAN devices
- Built-in pin header for connecting external devices
- Built-in USB Type-C port for power supply, firmware download and debugging
- Built-in power screw terminal block, supports a wide input voltage range of 7 to 36V, suitable for industrial applications.
- Built-in RTC chip, supports scheduled tasks
- Built-in digital isolation to avoid interference from external signals
- Built-in single-chip power isolation, providing a stable isolated voltage; no additional power supply is required for the isolated terminal.
- Built-in RS485 TX/RX indicators and CAN indicator for monitoring the module's operating status
- Rail-mounted protective enclosure, easy to install, safe to use
| MICROCONTROLLER | ESP32-S3 (default module: ESP32-S3R8, customizable for other modules) | |
|---|---|---|
| WIRELESS COMMUNICATION | 2.4GHz Wi-Fi (802.11 b/g/n), Bluetooth 5 (LE) | |
| USB | Connector | USB Type-C |
| Power supply | 5V | |
| Functions | Power supply, USB communication, firmware download, etc. | |
| ISOLATED RS485 | Connector | screw terminal |
| Direction control | Automatically controlled through the main controller's hardware flow settings | |
| Protection | TVS diode, overvoltage and electrostatic discharge protection | |
| resistor | 120 Ω matching resistor reserved on the board, normally closed (NC) by default, can be enabled with a jumper cap. | |
| ISOLATED CAN | Connector | screw terminal |
| Direction control | Automatic hardware control | |
| Protection | TVS diode, overvoltage and electrostatic discharge protection | |
| resistor | 120 Ω matching resistor reserved on the board, normally closed (NC) by default, can be enabled with a jumper cap. | |
| LED INDICATORS | PWR indicator | The red power indicator lights up when a USB connection is established and a voltage is detected. |
| RS485 indicator | The indicator lights up green when the RS485 port sends data and blue when it receives data. |
|
| CAN indicator | blinks during data transmission | |
| SCREW TERMINAL POWER SUPPLY | Voltage range | 7V ~ 36V |
| APPEARANCE | Enclosure | Protective case for rail mounting |
| Dimensions | 91.6 x 23.3 x 58.7 (mm) | |
for the AIoT Market
Featuring a 32-bit dual-core Xtensa LX7 processor clocked at 240MHz, delivering exceptional AI computing performance and a security encryption mechanism; it integrates 2.4GHz Wi-Fi and Bluetooth 5 (LE) dual-mode wireless connectivity.

Multiple Protections, Safer and More Reliable

Allows users to access the corresponding web page via a mobile or PC browser to control the device and send data

Complete software development kit, developer resources and tutorials to help you get started easily.

Provides sample code for IoT connectivity by integrating communication interfaces into a web page, thus enabling data visualization services.


| UPPER TERMINAL BLOCK DESCRIPTION | LOWER TERMINAL BLOCK DESCRIPTION | |||
|---|---|---|---|---|
| POWER SUPPLY TERMINAL | Positive supply: DC 7V ~ 36V | RS485 TERMINAL | A+ signal pin | |
| Negative supply | ||||
| TYPE-C | for power supply, firmware upload and USB communication | B signal pin | ||
| SH1.0 | GND | Ground (GND) | CAN TERMINAL | H signal pin |
| 3V3 | 3.3V power output | |||
| GPIO2 | ESP32-S3 I/O pin | L signal pin | ||
| GPIO1 | ESP32-S3 I/O pin | |||


- ESP32-S3
with an operating frequency up to 240MHz, supporting 2.4GHz WiFi and Bluetooth Low Energy (BLE). - The DC-DC power module
supports output up to 3.3V 2A - Pin connector (2.0mm pitch)
for connection to other functional modules - The screw terminal power input
supports a wide DC input voltage range of 7 to 36V. - USB Type-C port
for module power supply, firmware upload and USB communication - RTC battery connector
for connecting a rechargeable RTC battery (SH1.0) - Onboard ceramic antenna
- IPEX 1 connector
for connecting an external antenna, enabled by resoldering an onboard resistor. - 16MB Flash
- The digital isolation
prevents interference from external signals. - CAN transceiver chip
- LED Indicators
PWR: power indicator
RS485: green when sending data through the RS485 port; blue when receiving data through the RS485 port
CAN: blinks during data transmission - ESP32 boot button
- ESP32 reset button
- The power supply isolation
provides a stable isolated voltage; no additional power supply is required for the isolated terminal. - RS485 matching resistor:
120Ω matching resistor reserved on the board, enabled by jumper. - CAN matching resistor
onboard 120Ω, enabled by jumper - RS485 and CAN communication terminal
for connecting external RS485 and CAN devices - PCF85063 RTC chip
- DC-DC power chip
- ME6217C33M5G low-dropout regulator
, 800mA output (max.) - RS485 transceiver chip
- The TVS diode
effectively suppresses overvoltages and transient voltage spikes in the circuit.
Protective case with 35mm rail mounting bracket, easy to install and safe to use.


Software and hardware customization support,
including hardware interface, logo, label, enclosure and web page, etc.

