Technical summary
The TB6612 motor control module uses the TB6612FNG integrated circuit, able to deliver a high current (1.2A continuous) and featuring two output channels in an H-bridge MOSFET structure. It can drive two motors. The module supply voltage is independent of the motor supply: VCC (2.7V to 5.5V) and VM (15V max.) for the motor. The optimal motor operating voltage is between 2.5V and 13.5V; below 2.5V the motor does not run.
Control is simple: just set the MA and MB values (high or low) to control forward and reverse rotation of the two servo motors, and PWMA and PWMB to control the rotation speed. Only four I/O pins are used. The anti-reverse ports for connecting the motors and for signal input are robust and easy to plug in. Thanks to the low-voltage detection and thermal protection built into the chip to protect the circuit, you do not have to fear ruining your project or damaging the main control board.
Features
Uses the TB6612FNG motor driver integrated circuit with a maximum output current of 1.2A.
Robust and practical wiring, with anti-reverse port for motor connection and signal input.
Simple control: simultaneous control of two motors – MA and MB for the direction of rotation, and PWMA and PWMB for the rotation speed.
Dual supply. Module VCC: 2.7-5.5V, motor VM: 15V (max.).
Compact and lightweight, with 3mm mounting holes, ideal for smart vehicles.
Built-in thermal protection circuit and under-voltage detection.
Dimensions: 42x32mm
