Technical summary
The PCGU1000 is a digital function generator that can be connected to a computer through a USB connection. It offers, among others, sine, triangle and square waveforms; other shapes can easily be created. The waves are generated in the computer and reproduced by the unit through DDS (Direct Digital wave Synthesis). Frequencies up to 2MHz are possible. Equipped with 2 identical outputs and one TTL Sync output.
Output voltage from 1mVtt to 10Vtt at 600 ohms. The outputs are galvanically isolated to avoid measurement problems. Supplied with power adapter.
Specifications:
frequency range: 0.01Hz to 2MHz
Crystal-based stability
Outputs are galvanically isolated from the PC
Low-THD sine signal
Two parallel output connections for the waveforms
Sync output with TTL level
8192 signal memory
Standard waveforms: sine, square, triangle
Predefined composite signals: noise, sweep, etc.
Possibility to create your own waveforms with the built-in waveform editor
Sweep range from 0.0001Hz to 25MHz
Sweep time from 1ms to 10 hours
Noise bandwidth of 25MHz
Detailed Bode plot possible with the PC oscilloscope
Automated wave sequence generator using a file or the computer's RS232 input connection
DLL available for your own development
Box contents:
USB function generator
User manual
Software on CD-ROM
USB cable
Universal charger adapter
Specifications:
Amplitude: 100mVpp to 10Vpp @ 1kHz / 600 ohm load / 0V offset
Frequency setting resolution: 0.01%
With 40dB attenuator (1/100 output)
Direct Digital wave Synthesis (DDS), 8192 signal memory
Amplitude resolution: 0.4% of full scale
Offset: 0 to -5V or +5V max. (resolution 0.4% of full scale)
Vertical resolution: 8 bits (0.4% of full scale)
Sampling frequency: 50MHz
Low THD: < 0.08%
Output impedance: 2 x 50ohms
Power supply: 9VDC / 600mA power adapter (included)
Dimensions: 55 x 190 x 200mm
Min. system requirements:
IBM-compatible PC
Windows 98SE, ME, 2000, XP, Vista *
SVGA video card (min. 800 x 600)
Mouse
Free USB port
CD-ROM drive
Contents:
Function generator for PC with USB connection
USB cable
Beginner's manual
Software on CD
