Technical summary
Overview:
The ElecBP PWM 30A solar charge controller fully meets the requirements of your domestic photovoltaic systems, including lighting systems. The controller automatically detects the battery type (lead or Gel) as well as the voltage (12V or 24V).
If you wish to use another type of battery, lithium for example, you must configure the controller: full protection 12.2V, discharge 9.5V, restart 11.5V.
If the battery voltage is 12V, the maximum solar panel input is 25V 360W.
If the battery voltage is 24V, the maximum solar panel input is 50V 720W.
Advantages:
Built-in industrial microcontroller.
Large LCD screen allowing all parameters to be set.
Complete 4-stage PWM charge management.
Built-in protection against short circuits, open circuits, polarity reversal and overloads.
Dual protection against polarity reversal by MOSFET, low heat production.
Technical specifications:
Battery voltage: 12V / 24V Auto
Charge current: 30A
Discharge current: 10A
Max solar panel input voltage: 25V (12V battery), 50V (24V battery)
12V battery presets: 14.4V (sealed) 14.2V (Gel) 14.6V (flooded)
24V battery presets: 28.8V (sealed) 28.4V (Gel) 29.2V (flooded)
Float charge: 13.7V by default, adjustable
Discharge cutoff: 10.7V by default, adjustable
Discharge disconnect: 12.6V by default, adjustable
Charge reconnect: 13V
Dual USB port 5V / 3A
No-load consumption: <10mA
Operating temperature: -35°C ~ +60°C
Dimensions: 133.5x70x35mm
Certification: CE
