Technical summary
This board combines the power of a WLAN radio transceiver with the Linino operating system (MIPS GNU/Linux based on OPENWRT), combined with the ease of use of an Arduino (base similar to the Leonardo with an ATmega32u4 processor).
From then on, it will be very easy for you, through the Arduino, to execute commands on the Linux system in order to use it as an Ethernet and WLAN interface.
Features:
| Microcontroller | ATmega32u4 |
| Operating voltage | 5 V |
| Supply voltage (recommended) | 5V via microUSB or PoE 802.3af |
| Supply voltage (limits) | 6 - 20V |
| Number of I/O | 14 (including 7 able to generate PWM signals) |
| Number of "Analog/Digital" ports | 6 |
| Max. current per I/O | 40 mA |
| Current for 3.3V pins | 50 mA |
| Flash memory | 32 KB (ATmega32u4) of which 4KB used by the bootloader |
| SRAM | 2.5 KB (ATmega32u4) |
| EEPROM | 1 KB (ATmega32u4) |
| Clock speed | 16 MHz |
| Processor | MIPS 24K 400MHz |
| Memory | 64MB DDR2 RAM and 16MB Flash |
| AP or router | IEEE 802.11b/g/n 1x1 |
| Host/Device | USB 2.0 |
 |
Programmable via a language close to "C" (available as a free download), the Arduino modules can operate on their own or by communicating with software "running" on a computer (Flash, MaxMSP...).
We also offer in the right-hand column: - A USB cable |
