Technical summary
Development board based on an ESP32 and featuring an Ethernet connection. This board allows Wi-Fi, Bluetooth and Ethernet connections.
See the "Downloads" tab for the WT32-S1 chip datasheet, a WT32-ETH01 development board manual and an Arduino IDE code example to configure and operate the Ethernet.
See the "Downloads" tab for more information and/or to download files.
Features
| General | |
| Brand | Wireless label |
| Manufacturer model/part number | WT32-ETH01 |
| Model revision | V1.4 |
| Minimum operating temperature [°C] | -40 |
| Maximum operating temperature [°C] | 85 |
| Features | Microcontroller (MCU) |
| general physical appearance | |
| Main color | Black |
| Weight [g] | 15 |
| X dimension [mm] | 55 |
| Y dimension [mm] | 25 |
| mounting options | Pin connectors Mounting hole(s) |
| Mounting hole(s) diameter [mm] | 2 |
| form factor | Module (general) |
| general electrical properties | |
| Minimum supply voltage [VDC] | 3.3 |
| Maximum supply voltage [VDC] | 5 |
| Minimum I/O pin input voltage [V] | 3.3 |
| Maximum I/O pin input voltage [V] | 3.3 |
| I/O pin output voltage [V] | 3.3 |
| Maximum I/O pin source current [mA] | 20 |
| Maximum I/O pin sink current [mA] | 28 |
| Microcontroller | |
| Manufacturer | Espressif |
| Chip series | ESP32 |
| Maximum clock frequency [MHz] | 240 |
| Number of cores | 2 |
| Internal memory | |
| SRAM [KB] | 520 |
| PSRAM [MB] | 0 |
| Flash memory [MB] | 4 |
| EEPROM type | Emulated |
| Communication | |
| Hardware interface(s) | ADC I2C I2S PWM SPI GPIO UART Ethernet |
| Number of I/O pins | 15 |
| Maximum number of available hardware PWM channels | 12 |
| Maximum number of available analog input pins (ADC) | 11 |
| Maximum number of available analog output pins (DAC) | 0 |
| Maximum number of available hardware UART interfaces | 3 |
| Maximum number of available hardware I2C interfaces | 2 |
| Maximum number of available hardware SPI interfaces | 2 |
| USB to serial converter | None |
| Ethernet chip/SoC | LAN8720 |
| Maximum Ethernet transfer speed [Mbit/s] | 100 |
| Wireless communication | |
| Interface(s) | Wi-Fi Bluetooth |
| Wi-Fi chip/SoC | ESP32 |
| Wi-Fi frequency [GHz] | 2.4 |
| Bluetooth chip/SoC | ESP32 |
| Bluetooth version | 4.2 |
| Supported Bluetooth standards | LE Classic |
| Connectors | |
| Power connector(s) | Male pin header (2.54mm) |
| I/O connector(s) | RJ45 female connector, male (2.54mm) |
| Wi-Fi/Bluetooth antenna connector | Built-in antenna |
| Package contents | |
| Package contents | 1x WT32-ETH01 |
